A Thoughtful Place: How to Lengthen Drapes That are Too Short

8.12.2013

How to Lengthen Drapes That are Too Short

Today I want to give you the step by step instructions on how to lengthen drapes when they are too short. This method works if you stumble upon store bought drapes that are not in the desired length or if you want to add a custom detail to them. That happened to me after falling in love with 84 inch drapes.

lengthenyourdrapes

thediybigidea9

So I stumbled upon these drapes at HomeGoods. You can read more about that here. But they were 84 inches in length. Boo. I knew I wanted to use them and the print was exactly what I was looking for so I decided I would lengthen them. Here is the deal, though. I didn’t want to just add white panels to the bottom as it could appear that they were indeed too short an needed lengthening. So I decided to add a white panel plus a strip of the ikat fabric so that they would appear more intentional and deliberate. At least that is what I was going for!  I purchased two sets of panels {4 panels in total} but only planned to use three due to the way the windows are situated in this room. That left me with one extra panel to play with. If you are attempting to lengthen your drapes, I highly recommend buying one extra panel. You will need this to add a strip to the bottom of each drapery panel. This is not required, but I think it makes them look more custom and I will explain why in the detailed directions below. For my extra accent fabric, I went with a white medium weight denim. This had a nice texture that matched my drapes. You want the feel and weight of the two fabrics to match as much as possible.

IMG_2512

thediymaterials9

  • drapery panels {one for each window + one to lengthen the drapes}
  • detail fabric {1/2 yard per panel} Look for one that matches the weight and texture of the store bought panel.
  • thread
  • sewing machine
  • scissors
  • ironing board
  • straight pins
  • measuring tape

 

thediydirections5

Step 1: Measure your wall. You want to hang your drapes two inches below your ceiling or crown molding line. This measurement will tell you how long your drapes need to be. Add 1/2 inch for the drapes to go over the rod {or subtract if you are hanging them from rod clips}. After measuring, my drapes need to be 102.5 inches long.

Step 2: Length of necessary drapery panel – the length of the panel you bought = the additional fabric needed

My total drapery length should be 102.5  inches. My panels were 84 inches and I cut off a 3 inch seam.  So I was missing 21.5  inches of fabric. I chose to add more ikat fabric from an extra panel to each because I felt a strip of white fabric  21.5  inches wide was too much. I didn’t like how it looked when I held it up. This is up to  you. So I planned on adding 10  inches of white to each panel and an additional 12 inches of the gray ikat fabric to each. {this is .5 inches more than I need but I don’t want them to be too short!}.

Step 3: Cut the existing hem off of the drapery panel. This cut 3 inches off so my drapes are now technically only 81”. Keep that in mind as you will need to add that amount of fabric back!!! I know that I need to add 21.5 inches of fabric in some way!

 

customdrapes

IMG_2243

Step 4: Smooth our your accent fabric and measure the strips you need to cut. Remember this will be sewn to two pieces of the drapes so you need to allow for 1/4 inch seam allowance on both the top and bottom. I want my finished white stripe to be 10 inches so I will cut white strips that are 10 + .25 + .25 = 10.5 inches. {are you with me?!}

 

IMG_2245

Step 5: Set the white panels aside. Now cut your extra drapery fabric from the extra panel you bought. I want my finished additional gray fabric to be 12 inches. But I need to add .25 inches for the top seam allowance and I will add 3.5 inches to hem them. That means I cut the panel to be 15.75 inches.

addhem

Step 6: Hem the extra drapery fabric. I want a 3 inch hem, but will first fold the fabric over .5 inches and press. After you have pressed that, fold it again three inches and press with a hot iron.

IMG_2248

 

Step 7: After pressing, pin the hem so it stays in place before you sew it. Always measure as you press to be sure you are creating a straight hem.

IMG_2252

IMG_2257

hemming the new ikat fabric to add to the bottom

IMG_2351

Step 8: Now that you have hemmed your patterned fabric, you can pin that new section to the white panel. Remember to pin right sides together along the top edges. You will also need to hem your white panel. I waited until they were pinned together to fold over and pin the hem. That way they will meet up perfectly along the edge of the drapery panel. I hemmed them and then sewed right sides together of the gray and white fabric.

rightsidestogether

Step 9: Once you have sewn these two panels together, iron open the seam. You are virtually done! All that is left is

Step 10: Match this new panel up with your 81” drape and sew right sides together! Done!

IMG_2505

 

thediyreflection5

I am not sure I would do anything differently. Although I did try to bust them out in a hurry and sewed to wrong sides together. I was best friends with my seam ripper for quite some time. My biggest advice is to take your time and be patient. It is a very simple and easy process, but it just takes a bit of time. And lastly, I want to explain why we did the short rods for these drapes. Usually, I recommend using a full size rod that extends the length of the window. However, in this room, the windows are quite a challenge. They literally wrap the entire length of two walls and for the look of this space, I did not want rods extending the whole way.  Especially as I did not want panels in the middle of the wall. Because I was using these to soften the room and add pattern, I chose the short rods. This does not work in every space and should only be done when you have no other option or when you do not need the panels for privacy or to block out light. Our shutters do all of that for us. And now, at long last, we have pattern and softness on our walls.

IMG_2508

IMG_2523

I hope this is helpful. It really was very very simple to do. The key thing is to measure and do your math correctly. If you do, the labor part is a piece of cake. So the next time you stumble upon drapes that are too short, don’t let it stop you!

34 comments :

  1. These look great and once you get the measurements it really does look simple! Every time I see projects like this it makes me want a sewing machine! I think the last time I used a sewing machine was when I was 10!

    ReplyDelete
    Replies
    1. Yes! After figuring the math it was so easy. Bust out that sewing machine, girl!

      Delete
  2. What a great look and a practical idea as well. Getting the extra drape is a good tip!

    ReplyDelete
  3. You did a great job - and I agree that getting the extra drape is a great tip and makes things easier in the end! Love your whole room...

    ReplyDelete
  4. I just bought these curtains for my bedroom from TJ's on Friday. I had had white curtains up forever and decided that the pattern on these was too great to not get. Love them in your living room...and the way you lengthened them !

    ReplyDelete
    Replies
    1. What a small world. Yes! Fun to switch it up with some pattern.

      Delete
  5. Can you please tell me the brand of your sewing machine?

    ReplyDelete
    Replies
    1. It's a Brother. Nothing too fancy and I LOVE it. Hope that helps.

      Delete
  6. Great idea! Love stopping by here and checking out your DIY projects!

    ReplyDelete
    Replies
    1. Thanks so much, sweet friend. I love getting all of my coastal inspiration from you {and fashion}!

      Delete
  7. Great tutorial! Your drapes are beautiful!

    ReplyDelete
  8. They look great and this is a great tutorial! I might have to try this with a shower curtain!

    ReplyDelete
  9. Love how they turned out. I actually used the same drapes in our downstairs hall bath for a shower curtain. Love the fabric!!

    ReplyDelete
  10. I love this idea. I purchased some semi-sheer ones from Home Goods. What would you recommend to incorporate with those? I think the solid white might be strange in that application.

    ReplyDelete
  11. They look so good, and definitely intentional. Unfortunately I have too-short lined curtains in my bedroom (purchased back before I understood how long drapes should be and where to hang them!) so I wonder if there's a decent way to do this with lined curtains?

    ReplyDelete
  12. Such a great idea. Have to try it out

    ReplyDelete
  13. This comment has been removed by the author.

    ReplyDelete
  14. You are my hero with your easy to follow tutorial! I always find drapes that are too short. Great to know this!! You did a beautiful job Courteny.

    ReplyDelete
  15. Haha, I always sew the wrong sides together! Patience is not my strongest attribute when sewing :). Great tutorial!! I still LOVE your curtains so much :)

    ReplyDelete
  16. They look beautiful! I love the soft colors in the Ikat fabric, but how it brings your whole color scheme together:). I have to say, I'm pretty friendly with my seem ripper too, since I always make those little mistakes.

    Blessings,
    Kayla
    K.R. Dixon Designs
    http://adelightfulplacetodwell.com

    ReplyDelete
  17. Great tutorial! Love those curtains and the pillows!! Did you make the pillow covers as well?

    ReplyDelete
  18. Genius! I wish I had seen this 3 months ago!

    ReplyDelete
  19. Such a smart idea to add the curtain fabric again at the bottom--thanks for the tutorial!

    ReplyDelete
  20. Great curtain alterations! Could you please tell me the brand of your sectional, and where you purchased it. It's exactly what I've been looking for.

    ReplyDelete
  21. Such a great idea! Bringing in the same fabric at the bottom makes it work. I can look at 84" drapes again! Wahoooo!

    ReplyDelete
  22. Such a great idea! Adding that strip at the bottom really ties the blocks of fabric together. Thanks for sharing!

    ReplyDelete
  23. I just love your blog! It makes me happy to open my email each day and see your daily post has arrived! Your tutorial for those curtains is great... just the perfect touch for your living room :) where did you purchase your short rods? I think these might be just the trick for our somewhat awkward windows in our kitchen nook. Thanks!

    ReplyDelete
  24. Love the blankets in your home!! I just got this throw blanket and it had added a nice touch! Thanks for the tips!

    ReplyDelete
  25. Such a great idea! I love the pattern of the curtains too. Making what you have work out with a few tweaks is awesome.

    ReplyDelete
  26. How did you do the small curtain rods?

    ReplyDelete
  27. Can you please tell me the manufacturer of your curtains that you purchased at Home Goods? I want to try to find the fabric. It goes perfectly with my whole house!

    ReplyDelete

Thanks for dropping by! I LOVE hearing what you have to say and appreciate every comment. Your comments and feedback make writing this blog so worth it. Thank you!

Related Posts Plugin for WordPress, Blogger...